Technical Data Sheet (TDS)
Provided for the confirmed product grade and intended application.
Request DocumentLoading product...
Waterproofing
Waterproof Mortar
Flexible polymer-modified waterproof mortar for bathrooms, basements, and terrace protection.
Product Introduction
Flexible polymer-modified waterproof mortar for bathrooms, basements, and terrace protection.
DCY MORTAR Waterproof Mortar is a flexible cementitious waterproofing compound that forms a seamless, breathable barrier against water penetration. Formulated for tropical climates with heavy rainfall, it withstands positive and negative water pressure — essential for construction projects across Africa and Southeast Asia.
Key Features
- ✓Flexible membrane withstands structural movement
- ✓Resistant to positive and negative water pressure
- ✓Breathable — prevents moisture trapping
- ✓Compatible with tile overlay systems
- ✓Two-component and single-component options
- ✓Excellent adhesion to concrete and masonry
Quick Purchase Information
- MOQ
- Bulk planning typically starts from 1 x 20ft container. Mixed-SKU loading and first-order trial structures can be reviewed when product, packaging, production, and loading requirements are compatible.
- Sample Availability
- Available on request for evaluation. Sample quantity, courier cost, destination, and test method are confirmed case by case.
- OEM Availability
- Available after product grade, packaging format, artwork responsibilities, language, and claims are reviewed.
- Packaging Options
- 20kg bags · 40kg engineering grades available for selected formulas · OEM packaging available
- Production Lead Time
- Typical production planning is 7-15 days after product, packaging, artwork, quantity, and payment terms are confirmed.
- Container Loading Reference
- Illustrative planning at 25,000 kg net product is about 1,250 x 20kg bags before pallet and protection weight. Final bag count and net weight depend on the confirmed pack size, container payload rating, route limits, pallet method, SKU mix, and quotation.
Recommended Applications
- Bathroom and kitchen waterproofing
- Basement and foundation protection
- Balcony and terrace waterproofing
- Swimming pool and water tank lining
- Roof and flat surface protection
Not Recommended Applications
- Structural crack repair or movement joints without an approved detailing system
- Application over contaminated, loose, or actively leaking substrates
- Use as a final exposed decorative finish unless the selected system permits it
Packaging, Production & Export Preparation
Real factory and packaging documentation from the DCY MORTAR production base. Packaging artwork, pallet method, payload, and outbound loading plan are confirmed for each order.
Automated Packaging Line
Factory packaging equipment used to support consistent handling and order preparation
OEM Private Label Packaging
Representative custom packaging formats for distributor and private label orders
Export Dispatch Preparation
Finished products staged in a dry warehouse before outbound loading; final container plans vary by order
Technical Data
| Product Code | CY-KL11-20F / CY-KL12-20F |
| Mix Ratio | Powder : Water = 1 : 0.25–0.30 |
| Application Thickness | 2–3 mm (2 coats minimum) |
| Water Pressure Resistance | ≥ 0.6 MPa (positive) |
| Bond Strength to Concrete | ≥ 1.0 MPa |
| Crack Bridging | ≥ 0.5 mm at -10°C |
| Shelf Life | 12 months in dry storage |
Quality Test Report
Official third-party inspection documentation available for export compliance.
Waterproof Mortar Test Report
Packaging
20kg bags · 40kg engineering grades available for selected formulas · OEM packaging available
OEM Options
Launch your own branded Waterproof Mortar line with our OEM service.
- ✓Private label waterproofing system branding
- ✓Two-component kit with branded packaging
- ✓Custom formula for extreme rainfall regions
- ✓Multi-language application guides on packaging
Available Documents
Request current documents for the exact product grade and intended application.
Material Safety Data Sheet (MSDS)
Request the current document for the exact supplied product.
Request DocumentOEM Packaging Guide
Packaging checklist and artwork discussion after product and pack format confirmation.
Request DocumentCommercial Terms at a Glance
These are discussion guidelines. The signed quotation and order confirmation control the final commercial terms.
- Trade Terms
- FOB and CIF discussions are available. The selected Incoterm and named port are stated in the quotation.
- Payment Terms
- Payment structure is confirmed per order, buyer profile, packaging scope, and production arrangement.
- Quotation Validity
- Validity is stated on each quotation because raw materials, packaging, and freight conditions can change.
- Sample Freight
- Sample availability and courier cost are confirmed before dispatch. Freight may depend on weight and destination.
- Quotation Scope
- The quotation identifies product grade, quantity, packaging, trade term, destination, documents, and stated exclusions.
Frequently Asked Questions
How many coats are required for waterproofing?+-
Apply minimum 2 coats at right angles to each other, each 1–1.5mm thick. Total dry film thickness should be at least 2mm for standard applications.
Can tiles be installed directly over waterproof mortar?+-
Yes, after the waterproof layer is fully cured (typically 24–48 hours). Use C2 grade tile adhesive for wet area tile installation.
Is it suitable for basement negative-side waterproofing?+-
Yes, our polymer-modified formula resists negative water pressure, making it suitable for basement interior waterproofing applications.
What is the export MOQ for Waterproof Mortar?+-
Bulk planning typically starts from one 20ft container. Mixed-SKU loading and first-order trial structures can be reviewed when packaging, production, and loading requirements are compatible. Samples can be discussed separately before bulk commitment.
Can I request a Waterproof Mortar sample and datasheet?+-
Yes. Provide the target application, substrate, country, delivery address, and evaluation plan. The appropriate sample and current product-grade document can then be confirmed.
How is container loading calculated for Waterproof Mortar?+-
For early planning only, 25,000 kg net product equals about 1,250 x 20kg bags before pallet and protection weight. Final bag count and net weight depend on the confirmed pack size, container payload rating, route limits, pallet or non-pallet handling, SKU mix, and the commercial quotation.
Waterproofing
Request a Quote
Get factory-direct FOB/CIF pricing for Waterproof Mortar.
- ✓ Response within 24 hours
- ✓ Sample orders available
- ✓ COA & MSDS provided
- ✓ OEM private label options
Quick Inquiry
Related Products
Adhesive
Tile Adhesive
High-strength C1/C2 tile adhesive for ceramic, porcelain, and natural stone installation.
20kg bags · Palletized loading and OEM packaging available after confirmationView Details
Repair
Anti-Crack Mortar
Fiber-reinforced anti-crack mortar for facade repair and crack prevention on exterior walls.
20kg bags · 40kg engineering bags · OEM packaging availableView Details
Repair
Repair Mortar
High-strength repair mortar for concrete restoration, pothole repair, and structural maintenance.
20kg / 25kg paper bags with PE liner · OEM packaging availableView Details
Buyer Support
OEM Support
Product selection, private-label packaging discussion, artwork review, sample confirmation, and reorder continuity.
Export Experience
FOB and CIF coordination, order documentation, destination planning, and communication for distributor shipments.
Quality Control Process
Defined product identity, production checks, batch traceability, packaging inspection, and evidence-based complaint review.
Packaging Options
Bag weight, bucket format, neutral or private-label artwork, pallet planning, and moisture-protection requirements.
Technical Support
Product recommendations, datasheets, sample evaluation guidance, application boundaries, and technical follow-up.
Ready to Start Importing?
Get factory-direct pricing, product samples, and shipping quotes. Our export team responds within 24 hours.